With a dome camera, the lens looks through a transparent dome. That cover is part of the optical assembly and requires attention during installation and maintenance. Therefore, do not choose the location solely based on the compact appearance, but also on the desired image and the cover's accessibility.
A dome can contain a fixed camera or another configuration. Check the lens and the allowed adjustment space of the exact model. Have a test image taken of the entrance or walking path where it arrives. The round appearance does not tell anything about the distance at which a person can get sufficient details in view.
Match the mounting to the surface and use a suitable mounting solution for the connection. The enclosure should be able to close according to the diagram without the cable obstructing the seal. Discuss beforehand whether the cable enters from the back or through the side, so that no improvised opening is needed after drilling.
The optical assessment must match the fully assembled camera. Dirt, scratches, or incorrect mounting of the dome can affect image quality. After closing, check the details again at the desired distance. Store the protective film only as long as the mounting instruction requires; assess the final image with the normal operating condition.
If the camera has built-in infrared lighting, also evaluate the hood, seal around the lens, and nearby reflective surfaces. A clear daytime image does not exclude a white haze in the night. Request a night shot of the same scene, so that a problem is not noticed until after the first event.
A location high above a staircase can look visually attractive but make maintenance more difficult. Arrange how the outside of the roof can be safely reached and what cleaning procedure is allowed. Mention the ground, height, and a photo of the intended location in your application; the model determines which accessories will fit with it.
No. Evaluate the specified protection for the exact model and the installation. The housing shape alone is not a classification.
The final optical check should take place with a clean, correctly assembled cover.
