A wireless network bridge can establish a connection between two fixed points where a cable is inconvenient. Therefore, the camera itself does not need to be a Wi-Fi camera. The bridge forms a part of the network path; power and connections on both sides remain necessary.
Take photos from both mounting points in the direction of each other. Note trees, buildings, and objects that may temporarily block the way. A sightline in winter can change due to vegetation. Let the feasibility be assessed on site or with a suitable planning before a distance is offered as guaranteed range.
Count the cameras on the opposite side and note whether other network traffic also uses the same bridge. Multiple video streams may be active simultaneously. Let the desired recordings and the available capacity be evaluated together; a high stated maximum radio speed number is not the same as proven usable camera capacity on your terrain.
There must be an appropriate power supply at the bridge equipment and the cameras. Determine where connections are protected and accessible to be completed. A wireless connection replaces the route between the buildings, but does not make the installation on the buildings cable-free.
Note the assigned management addresses and the owner of the settings in the system documentation. Share passwords via the agreed secure transfer. In case of a malfunction, it must be clear who can check the bridge and who manages the camera or recorder.
Test all relevant cameras simultaneously and search for the recorded footage. Also observe the connection when the terrain is used normally. A short successful live view with one camera is insufficient to provide a complete expansion.
Not necessary. A connection between fixed points requires a suitable arrangement and assessment of the trajectory for this purpose.
Yes, the bridge equipment and cameras must be properly powered. Wireless data does not mean that the power supply is failing.
