A high camera position can provide an overview, but it imposes other requirements on execution and maintenance. First determine whether the goal can be achieved from that height. Then follow the appropriate access and planning for mounting and later service.
A camera mounted above in a hallway can provide a comprehensive view while keeping details at the door limited. Clearly define beforehand what should be recognizable and at what distance. Consider a lower or additional vantage point if that better serves the purpose. This will prevent a costly high mount from being adjusted later.
Provide height, ground conditions, obstacles, and accessibility. The contractor must determine the risks and appropriate work procedure. The Arboportal emphasizes that fall hazards require measures; a height number alone does not fully describe the risks. Do not plan the work based on the assumption that an existing ladder is always sufficient.
In a company hall, the installation location can be above a traffic lane or work zone. Discuss when that zone is available and how the work of others is coordinated. Also include access for equipment and the delivery of camera components in the appointment.
Record the camera model, connection and desired frame before the execution begins. Plan who will evaluate the test image below while the position is set. This way, changes are not discovered until the work area is again released.
A dirty lens or defective connection should also be accessible later. Ask how cleaning, realignment, and replacement are carried out. After installation, check a recording of the actual driving or route and note which accessibility remains necessary for further work.
No. The height must match the desired overview or detail and with a responsible execution.
A prior assessment of height, ground and accessibility prevents surprises and is part of the work preparation.
